350-801 CLCOR Implementing Cisco Collaboration Core Technologies pass in one week

350-801 CLCOR Implementing Cisco Collaboration Core Technologies
Duration: 120 minutes
Languages: English
Associated certifications:
CCNP Collaboration
CCIE Collaboration
Cisco Certified Specialist – Collaboration

Exam overview
This exam tests your knowledge of implementing core collaboration technologies, including:
Infrastructure and design
Protocols, codecs, and endpoints
Cisco IOS XE gateway and media resources
Call Control
QoS
Collaboration applications

Exam preparation
Prepare for your certification exam with official Cisco training or study on your own with self-study resources found on the Cisco Learning Network.

Official Cisco training

Implementing Cisco Collaboration Core Technologies (CLCOR)
Self-study resources
CLCOR training videos
CLCOR study materials

Exam Description:
Implementing Cisco Collaboration Core Technologies v1.1 (CLCOR 350-801) is a 120-minute exam associated with the CCNP and CCIE Collaboration Certifications. This exam certifies acandidate’s knowledge of implementing core collaboration technologies including infrastructure anddesign, protocols, and endpoints, Cisco IOS XE gateway and media resources, Call Control, QoS, andcollaboration applications. The course, Implementing Cisco Collaboration Core Technologies, helpscandidates to prepare for this exam.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. To better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Examkingdom Cisco 350-801 Exam pdf,

Best Cisco 350-801 Free downloads , Cisco 350-801 Dumps at Certkingdom.com

20% 1.0 Infrastructure and Design
1.1 Describe the Cisco on-premises, hybrid, and cloud collaboration solution design elements described in the SRND/PA
1.1.a Licensing (Smart, Flex)
1.1.b Sizing
1.1.c Bandwidth
1.1.d High availability
1.1.e Disaster recovery
1.1.f Dial plan
1.1.g Security (certificates, SRTP, TLS)
1.1.h QoS
1.2 Describe the purpose of Edge devices in the Cisco Collaboration architecture such as Expressway and Cisco Unified Border Element
1.3 Configure these network components to support Cisco Collaboration solutions
1.3.a DHCP
1.3.b NTP
1.3.c CDP
1.3.d LLDP
1.3.e LDAP
1.3.f TFTP
1.3.g Certificates
1.4 Troubleshoot these network components in a Cisco Collaboration solution
1.4.a DNS (A/AAA, SRV, Reverse Pointer Record (PTR))
1.4.b NTP
1.4.c LDAP integration on Cisco UCM
1.5 Explain these components to support Cisco Collaboration solutions
1.5.a SNMP
1.5.b DNS
1.5.c Directory Connector
1.6 Describe Webex Control Hub features

20% 2.0 Protocols, Codecs, and Endpoints
2.1 Troubleshoot these elements of a SIP conversation
2.1.a Call set up and tear down
2.1.b SDP
2.1.c DTMF
2.2 Identify the collaboration codecs for a given scenario
2.3 Deploy SIP endpoints
2.3.a Manual
2.3.b Self provisioning
2.3.c Bulk Administration Tool (BAT)
2.3.d Onboarding cloud devices
2.3.e Device onboarding via activation codes (MRA/on-premises)
2.4 Troubleshoot SIP endpoints
2.5 Describe SIP OAuth on Cisco UCM

15% 3.0 Cisco IOS XE Gateway and Media Resources
3.1 Configure voice gateway elements
3.1.a DTMF
3.1.b Voice translation rules and profiles
3.1.c Codec preference list
3.1.d Dial peers
3.2 Troubleshoot ISDN PRI/BRI
3.3 Identify the appropriate IOS XE media resources
3.4 Describe cloud calling hybrid local gateway

25% 4.0 Call Control
4.1 Describe the Cisco UCM digit analysis process
4.2 Implement toll fraud prevention on Cisco UCM
4.3 Configure globalized call routing in Cisco UCM
4.3.a Route patterns (traditional and +E.164)
4.3.b Translation patterns
4.3.c Standard local route group
4.3.d Transforms
4.3.e SIP route patterns
4.4 Describe Mobile and Remote Access (MRA)
4.5 Describe Webex Calling dial plan features
4.5.a Locations and numbers
4.5.b Outgoing and incoming permissions
4.5.c Transfer and forwarding restrictions

10% 5.0 QoS
5.1 Describe problems that can lead to poor voice and video quality
5.1.a Latency
5.1.b Jitter
5.1.c Packet loss
5.1.d Bandwidth
5.2 Describe the QoS requirements for voice and video
5.3 Describe the class models for providing QoS on a network
5.3.a 4/5 Class model
5.3.b 8 Class model
5.3.c QoS Baseline model (11 Class)
5.4 Describe the purpose and function of these DiffServ values as it pertains to collaboration
5.4.a EF
5.4.b AF41
5.4.c AF42
5.4.d CS3
5.4.e CS4
5.5 Describe QoS trust boundaries and their significance in LAN-based classification and marking
5.6 Describe and determine location-based CAC bandwidth requirements
5.7 Configure LLQ (class map, policy map, service policy)

10% 6.0 Collaboration Applications
6.1 Configure Cisco Unity Connection mailbox and MWI
6.2 Configure Cisco Unity Connection SIP integration options to call control
6.3 Describe Cisco Unity Connection call handlers
6.4 Deploy Webex App

QUESTION 1
Which two functionalities does Cisco Expressway provide in the Cisco Collaboration architecture? (Choose two.)

A. Survivable Remote Site Telephony functionality
B. customer interaction management services
C. secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence Video endpoints
D. MGCP gateway registration
E. Secure business-to-business communications

Correct Answer: CE

QUESTION 2
An engineer must extend the corporate phone system to mobile users connecting through the internet with their own devices. One requirement is to keep that as simple as possible for end users. Which infrastructure
element achieves these goals?

A. Cisco Express Mobility
B. Cisco Expressway-C and Expressway-E
C. Cisco Unified Border Element
D. Cisco Unified Instant Messaging and Presence

Correct Answer: C

QUESTION 3
A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?

A. Cisco PVDM4-128
B. software conference bridge on Cisco Unified Communications Manager
C. Cisco Webex Meetings Server
D. Cisco Meeting Server

Correct Answer: C

QUESTION 4
An engineer is designing a load balancing solution for two Cisco Unified Border Element routers. The first router (cube1.abс.com) takes 60% of the calls and the second router (cube2.abc.com) takes 40% of the calls.
Assume all DNS A records have been created. Which two SRV records are needed for a load balanced solution? (Choose two.)

A. _sip._udp.abc.com 60 IN SRV 2 60 5060 cube1.abc.com
B. _sip._udp.abc.com 60 IN SRV 60 1 5060 cube1.abc.com
C. _sip._udp.abc.com 60 IN SRV 1 40 5060 cube2.abc.com
D. _sip._udp.abc.com 60 IN SRV 3 60 5060 cube2.abc.com
E. _sip._udp.abc.com 60 IN SRV 1 60 5060 cube1.abc.com

Correct Answer: CE

QUESTION 5
Which two functions are provided by Cisco Expressway Series? (Choose two.)

A. interworking of SIP and H.323
B. endpoint registration
C. intercluster extension mobility
D. voice and video transcoding
E. voice and video conferencing

Correct Answer: AD